|
 |
 |
|
HD (Heavy
Duty) Fastener
At Tru-Fast, meeting our customers needs is our first priority. That is why
we have designed and engineered our new HD (Heavy Duty) Drill Point Fastener.
Produced to save you time and money by drilling faster, everytime and providing
backout resistance.
Our new HD (Heavy Duty) Drill Point Fastener is not just another #14.
|
|
|
|
 |
Head: Low profile #3 deep recess Phillips drive provides positive driving. |
| Threads: 13 deep single lead threads per inch. Universal use with wood, steel or concrete. (Concrete - predrill with a standard 3/16" masonry bit). | |
| Corrosion Protection: TRU-KOTE™ PC-3 torque coating meets or exceeds FM4470 corrosion standards. Formulated to enhance back-out resistance and withstand 30 cycles of the Kesternich DIN 50018 SFW 2.0 test. | |
| Back-out Resistance - tapered wedge entry: Exclusive TRU-FAST TAPERED ENTRY action wedges the screw tightly into the deck providing back-out resistance RESULTS! No costly call backs. | |
| Drill Point: A sharp drilling point provides fast and everytime drilling even in 14 gauge steel which saves labor and eliminates screw throw aways. BENEFITS! Increased profits. |
| STEEL | WOOD | CONCRETE | ||
| Pull-out Values | Reverse
back- out Torque |
Pull-out Values | Pull-out Values | Shear Strength |
| 18
Ga. - 830 lbs. 20 Ga. - 656 lbs. 22 Ga. - 472 lbs. 24 Ga. - 347 lbs. |
25.0
inch/lb. 25.5 inch/lb. 20.0 inch/lb. 17.0 inch/lb. |
1/2"
Plywood - 442 lbs. 3/4" Plywood - 495 lbs. Plank 1" Embedment - 517 lbs. |
3000
PSI Concrete 1" Embedment - 740 lbs. |
3000
PSI Concrete 1" Embedment - 586 lbs. |
| Note: All tests were conducted by an independent testing laboratory. Results of these tests are offered only as a guide and are not guaranteed in any way by TRU-FAST CORPORATION. Designated holding values depend on the quality of materials being anchored to. TRU-FAST CORPORATION recommends that pull-out tests be conducted to verify that the substrate provides adequate pull-out values. |
| © Copyright 2006 - Trufast, LLC |
